Amps
[Top] [All Lists]

[AMPS] Clipperton L Plate Choke

To: <amps@contesting.com>
Subject: [AMPS] Clipperton L Plate Choke
From: W8JI@contesting.com (Tom Rauch)
Date: Fri, 6 Aug 1999 11:27:09 -0400
Hi Jeff,

> My question - What is the value of resonance for that particular plate
> choke?

I assume you mean series resonance. Do you know how to 
measure series resonance? It has to be done with the choke in 
place and connected to the circuit at the bypass capacitor.

Always be sure series resonances (there are more than one) are 
as far from the Ham bands as possible. It is best to park them mid-
way between bands.  

> I measured about 200 uH, but I don't truly trust my measurement.

How did you measure it? 
73, Tom W8JI
w8ji@contesting.com

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>