Amps
[Top] [All Lists]

[AMPS] sb-200 troubles

To: <amps@contesting.com>
Subject: [AMPS] sb-200 troubles
From: amps@txrx.demon.co.uk (Steve Thompson)
Date: Wed, 11 Aug 1999 07:43:38 +0100

-----Original Message-----
From: Phil Levin <drpal@waterw.com>
To: amps@contesting.com <amps@contesting.com>
To: <amps@contesting.com>
Date: 10 August 1999 23:02
Subject: [AMPS] sb-200 troubles


>
>
>I have been trying to convert the sb-200 to six.
>
>Problems:
>
>1.)  Safety RF choke from output of tank circuit has blown
twice(could
>this be due to the parasitics???)


If you have kept the original, check it's not resonant at
50MHz.

>
>2.) Heath manual has resistance checks when amp is finally
assembled,
>first check says between either anode clip and to the
chassis should
>measure 180 K ohms and I'm getting 240 K ohms???


Duff bleeder resistors in the capacitor stack?

Steve



--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>