Amps
[Top] [All Lists]

[AMPS] K2AW Module

To: <amps@contesting.com>
Subject: [AMPS] K2AW Module
From: measures@vcnet.com (measures)
Date: Fri, 27 Aug 1999 19:40:38 -0700
>
>Would like some info on the K2AW modules,
>are they just a diode string?
>Still require equalization?
>
>Any pros or cons to a regular diode string?
>
?  Modern rectifier diodes require no equalization if they are similar to 
start with.     Old habits die slowly.    In fact, traditional 
"equalization" can lead to premature diode failure.  //  As I understant 
it   k2aw modules are made of 1n5408s that are potted in epoxy.   Potting 
increases thermal resistance and increases junction temperature.    I 
prefer to mount diodes on G10 perfboard since it affords optimal cooling. 
 //  Potted block rectifiers are more costly than individual units.  For 
example, a 10kV string of individual 1n5408s costs about $2.  .  
>
-  later, Derek

-  Rich..., 805.386.3734, www.vcnet.com/measures.  


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>