Amps
[Top] [All Lists]

[AMPS] Alpha 87A firmware upgrade

To: <amps@contesting.com>
Subject: [AMPS] Alpha 87A firmware upgrade
From: jones@cunliffegroup.com (Jamie Jones)
Date: Sat, 28 Aug 1999 09:49:13 -0400
I have some pictures of a nice fire caused by constant tuning into a
variable load . ( tunetime 40sec)

In this case the load was a bad piece of cable and connector and changed
with the amount of carbon produced.
The fire was under a cabin and lucky for all of us it "only burned a hole
into an old treestump.

Jamie
----- Original Message -----
From: John Nelson <John_Nelson@compuserve.com>
To: Hardy Landskov <n7rt@doitnow.com>; QRO reflector <amps@contesting.com>
Sent: Saturday, August 28, 1999 5:17 AM
Subject: [AMPS] Alpha 87A firmware upgrade


>
> Message text written by Hardy Landskov
>
> >That way, any anomallies in antenna performance would immediately show
up.
> Just my preference plus cheaper. If your antenna went south, who
> knows what the automatic tunining would do.?<
>
> In the case of the 87A, I'm sure that some part of its extensive
protection
> circuitry would react and shut the unit down -- the VSWR protection is
> extremely fast and reliable, for instance. But that's a good point.
>
> 73 John
> GW4FRX
>
>
>
>
>
> --
> FAQ on WWW:               http://www.contesting.com/ampsfaq.html
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>