Amps
[Top] [All Lists]

[AMPS] Feedpoint impedance vs SWR

To: <amps@contesting.com>
Subject: [AMPS] Feedpoint impedance vs SWR
From: n7rt@doitnow.com (Hardy Landskov)
Date: Sat, 02 Oct 1999 17:37:17 -0700
At 03:04 AM 10/03/1999 -0700, measures wrote:
>
>>
>>
>>
>>I think I am understanding well the measured SWR vs impedance along the
>>line question.
>>  
>>My next question is:   Given, say, a 100 ohm resistive antenna impedance
>>(at the antenna terminals) connected to (assumed lossless) 50 ohm coax
>>line, of multiple wavelengths, (producing a 2:1 SWR) What is the most
>>extreme feed point impedance swing in the line and how far down the line 
>>is it?  
>> And how can one compute this mathematically, if one does not have
>>access to a smith chart?
>>
>?  My guess is that a quarter wave 50-ohm line would transform the 
>100-ohms to [100^2 + 50^2]^0.5 =[10k + 2.5k]^0.5 = 111.8-ohms.  However, 
>with a half wavelength of any Z coax, the 100-ohms would not be 
>transformed.  
>
>later, Pat. 
>
>-  Rich..., 805.386.3734, www.vcnet.com/measures.  
>
>

My guess is 25 ohms

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>