Judging from the 50+ messages from this reflector today, I'd say a couple
of you (and you know who you are) didn't leave the house for work today.
All wound-up with SWR are we ?
Phil
At 01:16 AM 10/5/99 +0100, you wrote:
>
>At 07:35 PM 10/4/99 -0500, bob alexander wrote:
>...
>
>>Hi Rich,
>>I think the main problem here is a lack of understanding as to what a
>>standing wave is. It is simply a voltage or current on a line that
>>changes amplitude as you move from one end of the line to the other.
>>This is due to the Z mismatch at the load/transmission line junction.
>>Using your example of a 50 ohm load & 93 ohm line:
>>with 100 watts output from the generator the voltage at the generator
>>end of the 93 ohm 1/2 wavelength line will be 70.71 volts @ 1.414 amps.
>>ExI = 100 E/I = 50 ohms.
>>
>>At the 1/4 wavelength point on the line the voltage will be 131.52 volts
>>@ .77 Amps and 90 dgr phase angle. The Z at this point on the line is
>>172.98 ohms... eI=100 e/i= 172.98 ohms and the max E/ min E =
>>131.52/70.71 = 1.86 = VSWR
>>
>>At the antenna end of the line the voltage is again 70.71 v and the
>>current is 1.414 Amps which gives 100 watts and 50 ohms. 93 ohm
>>feedline / 50 ohm load = 1.86:1 SWR.
>>
>>So, The Z looking into the cable is simply the voltage / current at that
>>point on the line. If you measure the voltage and current and
>>associated phase angles with a scope and the appropriate probes you will
>>see a single voltage and a single current at each measurement point.
>
>My compliments, Bob, for adding some substance on this topic after 2 days
>of non-stop sniping back and forth among 3 or maybe 4 individuals. Guys,
>nobody else cares about this tit-for-tat stuff. Enough, already -- back to
>amps, puleeze!
>
>73, Pete Smith N4ZR
>n4zr@contesting.com
>
>Sometimes a tower is just a tower
>
>--
>FAQ on WWW: http://www.contesting.com/ampsfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
>
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|