Rich-
The specs say approx 30pf input
rough figuring.....
2 tubes 60pf
misc wire and socket TT about 100pf
Xc@50Mc about 30k ohms.
The specs also say the tube wants about 2.5W
drive. 2 x tube about 5W.
If I have 10W and I want 60V and half the power
is going into my tubes and half into my resistor it looks
like a 1:6 turns ratio and an 1800ohm resistor will get me
the right swing from my 10W and look like 50ohm to the
exciter.
So, why do I need tuned input?
Or am I way out in left field.?
-bob
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|