Amps
[Top] [All Lists]

[AMPS] RJ1A/RJ1H for Alpha 78

To: <amps@contesting.com>
Subject: [AMPS] RJ1A/RJ1H for Alpha 78
From: measures@vcnet.com (measures)
Date: Mon, 18 Oct 1999 17:16:08 -0700
>Total time to end of contact bounce is the only parameter that really 
>means anything in terms of closure time...
>
This is how I measure closure time, Dick.  Either relay's coil has 0.3H.  
In my experience, it much more initial volts to quickly overcome this 
much inductance.  .   
>
>-----Original Message-----
>From:  measures [SMTP:measures@vcnet.com]
>Sent:  Saturday, October 16, 1999 7:29 PM
>To:    'amps@contesting.com'   
>Subject:       RE: [AMPS] RJ1A/RJ1H for Alpha 78
>
>
>>
>>Supply voltage is around 36V as I recall --- 
>>
>thanks, Dick.  I do not see how 36v OC is able to cause closure three to 
>four times faster than 26v.    
>
>
>-  Rich..., 805.386.3734, www.vcnet.com/measures.  
>
>
>--
>FAQ on WWW:               http://www.contesting.com/ampsfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>


-  Rich..., 805.386.3734, www.vcnet.com/measures.  


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>