>There are a couple of ways. Conventional AB1 with regulated screensupply
>and passive input (control grid shunted to ground with 50 ohms) or as I
>use the tube; in G2DAF configuration, .........
(Total IMD products in voice service: about 22 db below PEP)
- Rich..., 805.386.3734, www.vcnet.com/measures.
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|