Amps
[Top] [All Lists]

[AMPS] 30S1 HV Cap Needed (C206)

To: <amps@contesting.com>
Subject: [AMPS] 30S1 HV Cap Needed (C206)
From: bipi@worldnet.att.net (Leigh)
Date: Wed, 20 Oct 1999 19:01:15 -0700
Some may remember that I have been having trouble with my 30S1
blowing the HV line fuses when increasing the drive (and,
therefore, the plate current).  I was pretty darn sure it was the
filter choke as it has always looked like it got cooked at high
temperature sometime during it's life.  Well, I replaced it but
it didn't cure the problem.  However, in the process, I found
that the high-voltage capacitor, C206, the capacitor that is in
parallel with the choke, is leaking oil and is probably the
culprit of my problem.  So I am looking for a 0.15 uF 5000V
capacitor to replace it.  I would prefer a direct Collins
replacement if someone has a spare.  It is C206, Collins part
#930-0035-000, 0.15 uF, 10%, 5000V.  Thank you for your time.

73 de Mike
K7PI
Mercer Island, WA

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] 30S1 HV Cap Needed (C206), Leigh <=