Amps
[Top] [All Lists]

[AMPS] Shielding meters

To: <amps@contesting.com>
Subject: [AMPS] Shielding meters
From: measures@vcnet.com (measures)
Date: Tue, 26 Oct 1999 06:11:18 -0700
>
>I have four 3" meters across the top of the panel of the RF section of my 
>(under
>construction) amplifier.  They are about 3-1/2" away from the tank coil.  
>I have
>several options:
>
>- Build the top of the enclosure under the meters.  The best idea, but I'm 
>not
>sure it's practical.  If not,
>
>- Make shields out of cat food cans or something.  Any suggestions?
>
put PEM nuts on a chassis that will cover the back sides of the meters.  
Fasten to the front panel with screws.  Use copper tubing to shield the 
wires to the meter movements.  


-  Rich..., 805.386.3734, www.vcnet.com/measures.  


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>