Amps
[Top] [All Lists]

[AMPS] YD 1130 = 3-500ZG???

To: <amps@contesting.com>
Subject: [AMPS] YD 1130 = 3-500ZG???
From: sm5ki@algonet.se (sm5ki)
Date: Mon, 06 Dec 1999 22:36:23 +0000
I am the owner of a pair of PHILIPS (=AMPEREX) YD 1130 with graphite anodes
made in France. According to an old PHILIPS tube manual they should be
equivalent  electrically to the 3-400Z ( max 3000 volts ) and the same size
as the EIMAC tube. But my tubes have the same size as the 3-500Z????? Can
anyone give an explanation? Can they be run up to 4000 volts? Are  they =
the 3-500ZG? I remember the EIMAC tubes in my SB 220 I  built around 1968-69
had graphite anodes and I also remember EIMAC had graphite anodes in their
3-500Z ads in those years. Did EIMAC manufacture the tubes themselves or did
they buy them from PHILIPS / AMPEREX?

Anyone? / 73s de Hans SM5KI

sm5ki@algonet.se


----------
>Från: Phil Levin W2GE <w2ge@home.com>
>Till: "amps@contesting.com" <amps@contesting.com>
>Ämne: [AMPS] Pictures of these tubes
>Datum: tis 30 nov 1999 19.00
>

>
>
>Pictures of most of these russian tubes with home-brew coaxial sockets
>are available at:
>
>
>http://www.sp.dianet.or.jp/~ja8fdt/tube/
>
>
>Thanks again,  Phil W2GE
>
>--
>FAQ on WWW:               http://www.contesting.com/ampsfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>