Amps
[Top] [All Lists]

[AMPS] SB-230 re-tube

To: <amps@contesting.com>
Subject: [AMPS] SB-230 re-tube
From: nospam4me@juno.com (nospam4me@juno.com)
Date: Mon, 13 Dec 1999 21:56:44 -0800
Bill,
If you would have sold me that amplifier years ago when I tried to buy
it, you wouldn't have this problem now...
Use the same type of tube if you can find one... I find them surplus
quite a bit, just kind of pricey.  There are two anode materials.... I
have one of an aluminum type material and another of a copper type...
Both work well, but I like the copper type anode material.  
You can follow the tube installation information in reverse, the manual
has it well described.  

cheers
skipp   wv6f    ex N6BPK

From: bcrowell@excite.com
To: amps@contesting.com
Did this reflector ever have a thread on re-tubing the SB-230?  Bill
Crowell, N6AYJ


___________________________________________________________________
Why pay more to get Web access?
Try Juno for FREE -- then it's just $9.95/month if you act NOW!
Get your free software today: http://dl.www.juno.com/dynoget/tagj.

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] SB-230 re-tube, nospam4me@juno.com <=