Amps
[Top] [All Lists]

[AMPS] Power attenuator

To: <amps@contesting.com>
Subject: [AMPS] Power attenuator
From: RFpower@radiodan.com (Radiodan W7RF)
Date: Mon, 20 Dec 1999 12:51:37 -0800
Hi Dave,

BIRD makes a neat little power attenuator and it's available in values of
.5,1,2,3,4,5,6,10,20,30 DB. Power handling is 150 watts when mounted on your
heatsink.

I have them all in stock for $30 each + shipping.
See a picture of it at http://radiodan.com/Henry/parts/parts.htm click on
"BIRD attenuators"

This is what HENRY uses as the input padder in their Solid State amps. It's
always 50 ohms to the input of rig.

73, Dan Magro W7RF, (President WARC 1999, member SCDXC, SCCC)
Manufacturers Rep & Distributor for HENRY RF Power Amplifiers.
RF Applications Power Measuring equipment, See the VFD & WinWatt!
www.radiodan.com <http://www.radiodan.com>     RFpower@radiodan.com
<mailto:RFpower@radiodan.com> A trip to our web site is worth the click!




> -----Original Message-----
> From: owner-amps@contesting.com [mailto:owner-amps@contesting.com]On
> Behalf Of Dave D'Epagnier
> Sent: Monday, December 20, 1999 7:24 AM
> To: 'amps@contesting.com'
> Subject: [AMPS] Power attenuator
>
>
>
> Does anybody know where I can get an inexpensive 100W 20dB or more
> attenuator (not dummy load) so I can run a 2-tone test on my exciter? I'm
> having a hard time finding one for less than an arm and a leg.
>
> Thanks,
>
> Dave
> K0QE
>
> --
> FAQ on WWW:               http://www.contesting.com/ampsfaq.html
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm
>
>


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>