Amps
[Top] [All Lists]

[AMPS] 6M amp circuits

To: <amps@contesting.com>
Subject: [AMPS] 6M amp circuits
From: K4SO@aol.com (K4SO@aol.com)
Date: Sat, 25 Dec 1999 15:04:47 EST
Can someone point me to a good circuit for a pair of 4CX250Rs on 6M? I have 
built one using a design in 1982 handbook for a single one but am looking for 
proven values for the tank circuit for a pair. I am also looking for a 
suitable tuning cap (that I think should be 5-40pf or thereabouts) with 
2.5-3.5kV spacing. I pruned a cap for use but the minimum capacitance is too 
large and I only have a small collection of doorknobs for use in series to 
drop it's value. I know some circuit details have been on here recently, but 
used a different cathode/grid arrangement and I'm not willing to start over. 
Thanks for any information and Happy Holidays! 73, Mark

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] 6M amp circuits, K4SO@aol.com <=