>
>> The original problem was that the HV took a short cut thru the side of a
>> Millen HV connector to the chassis. My B+ surge resistor did it's job but
>> lost it's life in the process. Apparently, this is when the zener went
also.
>
>There are two types of Millen HV connector users when dealing with < 2500v
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|