Amps
[Top] [All Lists]

[AMPS] 50 MHz Amp Details

To: <amps@contesting.com>
Subject: [AMPS] 50 MHz Amp Details
From: k7cw@qsl.net (Paul Kiesel)
Date: Tue, 4 Jan 2000 07:06:01 -0800 (PST)
Hi Remi,

As you know, but many obviously didn't, I was just
kidding about the GS35 specs that "I heard" about. For
those who haven't read much about the GS35B or GS31B,
these two tubes are an amplifier builder's dream with
their low cost and high power (1500 watts and 1000
watts, respectively, anode dissipation)ratings. Also,
they are rated to 1 GHz.

73,  Paul   K7CW

--- Remigijus <r.vaicius@omnitel.net> wrote:
> 
> Hi Bob and all on this reflector,
> 
> If you like to see more russian tubes data please
> try :
> 
> http://www.tubes.ru/
> 
> If you will click on "All types" you will have a
> long 
> list of different tubes. 
> 
> Good luck!!
> 
> Remi LY2MW
> 
> 
> At 13:00 2000.01.03 -0800, you wrote:
> >Yes George data on the Soviet tubes is incomplete
> and somewhat spotty at
> >this stage. But DF6NA has a web Page up which
> documents which has more than
> >physical characteristics. The url is:
> http://df6na.mayn.de/~df6na/tubes.htm
> >No airflow vs. dissipation numbers here but there
> are voltages/currents
> >(Max and Typical)
> >
> >73s
> >
> >Bob K1TA
> 
> 
> --
> FAQ on WWW:              
> http://www.contesting.com/ampsfaq.html
> Submissions:              amps@contesting.com
> Administrative requests: 
> amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
> Search:                  
> http://www.contesting.com/km9p/search.htm
> 
> 

__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://messenger.yahoo.com

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>