>Looking for a good deal on a set of three 3-500z tubes. If you have them
>and they are in like new, let me know what your asking.
>
Used 3-500Zs should be checked for bent filament helices and gas with a
high-pot tester. Anything under 6kV grid-fil. may short when hot.
>
good luck
- Rich..., 805.386.3734, www.vcnet.com/measures.
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|