70 ohms for a pair.
73,
Larry - W7IUV
At 04:03 PM 1/12/00 -0600, Charlie Ocker wrote:
>
>Greetings,
>
>After digesting the material that I have collected and the responses
>from an earlier post (tnx, Skipp), I think the best way to go for my
>homebrew amp is to run the 4-400's in class AB grounded grid.
>
>I have dug up a couple of construction articles. One is from the 1982
>ARRL Handbook. In chapter 6, it describes "An Economy 2-kW Amplifier"
>that uses these tubes grounded grid. It doesn't, however, have a tuned
>input network.
>
>I'd like to add one. But before I do, I need to know what the approx.
>input impedance is for a pair of 4-400's in grounded grid. If it
>matters any, I plan to run 3000 ~ 3500v on the plates.
>
>Thanks in advance!
>
>73,
>Charlie N9CO
>
>--
>FAQ on WWW: http://www.contesting.com/ampsfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|