Rich Measures wrote:
>>Although many wattmeters do use diode detectors, they do not
>>calculate the power directly from the rectified voltage. Instead they
>>are calibrated from other wattmeters whose calibrations are ultimately
>>traceable to thermal standards.
>>
>For PEP measurement?
The calibrations are done on CW, ie under steady-state conditions.
A "peak reading" power meter displays the highest value of the rectified
voltage - in other words it senses the peak of the modulation envelope,
to read PEP.
>>
>>Earlier, Rich Measures said:
>>>> ? RMS is equivalent DC heating ability. For example, with a
>>>> sine-wave,
>>>> 200w-pk would have the heating ability of 100DC watts. .
>>
>>This "200w-pk" is a peak instantaneous power. Peak instantaneous power
>>is a notion with very little physical meaning, and no practical use.
>>Ignore it - its only power is to confuse.
>>
>This is essentially how the FCC measures PEP.
I cannot believe that.
73 from Ian G3SEK Editor, 'The VHF/UHF DX Book'
'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.demon.co.uk/g3sek
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|