Amps
[Top] [All Lists]

[AMPS] 3CPX-800A7

To: <amps@contesting.com>
Subject: [AMPS] 3CPX-800A7
From: jimsmith@gotnet.net (Jim Smith)
Date: Tue, 25 Jan 2000 18:48:59 -0800
    I've been getting ready to build an amplifier using 2 3CX800A7 tubes,
but have found a well known trader on the newsgroups, and eBay now selling
3CPX800A7 medical pulls. From what I can tell, the tubes are exactly the
same, except the latter is rated for a higher plate voltage, and much higher
plate current. The tube produces 6kW out with 320 watts of drive in typical
operation as a cathode driven amplifier.
    My question is, what kind of performance can I expect with less than 100
watts of drive using it in a class AB amplifier? Does anyone have any
experience with this tube? Maybe I can get by with just one tube.
    Thanks for your input,
Jim Smith, KQ6UV



--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>