Amps
[Top] [All Lists]

[AMPS] Power Supply Diodes

To: <amps@contesting.com>
Subject: [AMPS] Power Supply Diodes
From: measures@vcnet.com (measures)
Date: Thu, 3 Feb 2000 19:01:53 -0700
>
>At 05:10 AM 2/3/00 -0700, measures wrote:
>
>
>> >The brand is normally marked with white paint.  For example, "GI" means
>> >General Instruments.
>
>The white paint says "RT", any guess on that one?
>
beats me. 
>
> >If you had a 50% or better piv safety factor, this failure is not easy to
>> >explain.
>
>At the time of failure, the calculated safety factor was 44.5%. I guess 
>that's a bit marginal. Still it should not have quit.

sgreed
cheers

-  Rich..., 805.386.3734, www.vcnet.com/measures.  


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>