Amps
[Top] [All Lists]

[AMPS] Diodes

To: <amps@contesting.com>
Subject: [AMPS] Diodes
From: agray@voicenet.com (Alan Gray)
Date: Sat, 26 Feb 2000 20:10:32 -0500
Phil-

Try this web site for info on CKE products:

http://www.cke.com/

Alan, W3BV




----- Original Message ----- 
From: "Phil Clements" <philk5pc@tyler.net>
To: <amps@contesting.com>
Sent: Friday, February 25, 2000 3:50 PM
Subject: [AMPS] Diodes


> 
> I just liberated a diode bridge from a radio junk yard.
> It is by "CKE," whomever that is; Model # CK236.
> There are 120 diodes in the bridge, made by "GI"
> Model # GI 8823.
> 
> The unique thing about the bridge is that there are no caps
> or resistors across each diode, but there is an MOV; made
> by CKE, Model # Z420LA20A.
> 
> The obvious questions are:
> 
> !. What is the current and PIV rating of this bridge?
> 
> 2. Is putting MOV's across diodes in a bridge old technology
>     that was discarded because it was unnecessary, or a
>     good idea; then, and/or now?
> 
> Any help on these numbers will be appreciated,( or the tel.#
> or web site for "CKE.")
> 
> (((73)))
> Phil, K5PC
> 
> 2.
> 
> 
> 
> --
> FAQ on WWW:               http://www.contesting.com/ampsfaq.html
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm
> 
> 


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>