To: | <amps@contesting.com> |
---|---|
Subject: | [AMPS] Misc. Oscillations |
From: | 2@vc.net (measures) |
Date: | Sun, 5 Mar 2000 20:50:45 -0700 |
> > > >> From: Mike Sawyer > >> 5% over voltage on a tube drastically reduces its life. That's >> not Measure's word, look at any RCA tube manual written from >> about 1938 on. > >I'm not arguing that improper filament voltage doesn't shorten >tube life or reduce RF output. Simply, given the design of most >commercially available amateur amplifiers it would not be safe >to include a filament rheostat. > Adjusting filament-v is simpler than tuning a tank. Several models of Henry Radio amplifiers use approx. 6v on 3-500Z/8008 (4.8v) filaments. How safe is that, Mr Subich? -- FAQ on WWW: http://www.contesting.com/ampsfaq.html Submissions: amps@contesting.com Administrative requests: amps-REQUEST@contesting.com Problems: owner-amps@contesting.com Search: http://www.contesting.com/km9p/search.htm |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [AMPS] Network analysis of suppressors, measures |
---|---|
Next by Date: | [AMPS] poor science?, measures |
Previous by Thread: | [AMPS] Misc. Oscillations, measures |
Next by Thread: | [AMPS] Misc. Oscillations, Tom Rauch |
Indexes: | [Date] [Thread] [Top] [All Lists] |