> A word of caution on Harbach suppressors. If the suppressor for a 922 is
> short on L - the VHF Q of the suppressor may not be low enough to prevent
> intermittent oscillation at c. 120MHz. . A VHF suppressor that runs
> cool at 28MHz is unlikely to be very lossy at VHF.
I just installed Harbach suppressors in a 922. The original was 2 1/2 turns
in parallel with 24 ohms. Al's suppressor consists of 5 turns of nichrome
and two 100 ohm 3 watt Matsushita resistors. They do run a little warm at
28 MHz.
Steve KT4FY
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|