[AMPS] FAILURE OF PARASITIC RESISTORS IN AL-811X AMPLIFIER

[Peter_Chadwick@mitel.com (Peter Chadwick)]

Jon says:

> If the K-factor of an amp is less than 1, it is unconditionally stable!

That depends on whether or not your K-factor is the Linville stability
factor or the Stern stability factor. Since K tends to be used for both, you
need to define which.

73

Peter G3RZP




--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm