This is a multi-part message in MIME format.
------=_NextPart_000_00FB_01BF8D24.8B0D31A0
Content-Type: text/plain;
charset="iso-8859-8-i"
Content-Transfer-Encoding: quoted-printable
Hello
Can anyone advise for best procedure to check \ test \ estimate =
performance for a modified 1kw linear amp without actually driving it =
from the rig? Any measurements that can be done before "real" usage ?
I made a 6m mod to my AL80A here (NO MORE 10 METERS...) , and would like =
to gain more confidence.
My test gear includes the MFJ259, a DVM & a 50 Mhz scope.
Thanks in advance.
4Z4TL, Isaac L.
------=_NextPart_000_00FB_01BF8D24.8B0D31A0
Content-Type: text/html;
charset="iso-8859-8-i"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-8-i" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2014.210" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#b1bab8>
<DIV><FONT color=3D#000000 face=3DArial>Hello</FONT></DIV>
<DIV><FONT color=3D#000000>Can anyone advise for best procedure to check =
\ test \=20
estimate performance for a modified 1kw linear amp without actually =
driving it=20
from the rig? Any measurements that can be done before "real" usage=20
?</FONT></DIV>
<DIV><FONT color=3D#000000>I made a 6m mod to my AL80A here (NO MORE 10 =
METERS...)=20
, and would like to gain more confidence.</FONT></DIV>
<DIV><FONT color=3D#000000>
<DIV><FONT color=3D#000000>My test gear includes the MFJ259, a DVM & =
a 50 Mhz=20
scope.</FONT></DIV>Thanks in advance.</FONT></DIV>
<DIV><FONT color=3D#000000 face=3DArial>4Z4TL, Isaac =
L.</FONT></DIV></BODY></HTML>
------=_NextPart_000_00FB_01BF8D24.8B0D31A0--
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|