> Can anyone offer me some advice on the FL2100Z please?
>
> Ive recently bought one for a silly price (due to the fact it wasn't
> working and had many faults).
>
> I've now managed to get down to two problems, any advice/assistance would
> be much appreciated. Replies direct to
>
> carr.n@runshaw.ac.uk please.
>
>
> (1) I have a bad i/p match on 10/12/15/20m the other bands are good. How
> do I adjust the input matching? A quick look inside the back panel cut
> out, suggests the band switch L.C. tuning are preset values with no
> trimmers, Am I missing something? (I don't have a cct diagram)
>
> (2) Someone has told me they think the following is a know problem, and
> this is the place to find the answer, here goes.....
>
> No matter how well the amp tunes up on a particular band (and all bands
> are affected) after a short period of time the o/p is nil and I have to
> completely retune, for example, tune up to 400w on 160m, leave things
> running on stby, come back 15 mins later and o/p is nil. a retune brings
> it back up, but plate and load and in completely different positions. Ive
> heard there's a capacitor somewhere thats the culprit????
>
> 73 and hope to hear from someone de Neil G0JHC.
>
>
>
>
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|