Amps
[Top] [All Lists]

[AMPS] IC706 amplifier interface

To: <amps@contesting.com>
Subject: [AMPS] IC706 amplifier interface
From: 2@vc.net (measures)
Date: Sat, 6 May 2000 06:48:24 -0700
>
>Want to drive an amp with your IC706? There is no simple way to key the
>amp relay, short of interfacing to the accessory connector on the 706,
>which is a 13 pin DIN . In addition there is no pinout that can handle
>most amp relay loads directly.
>
>W1WEF is offering an IC706 amp interface which will control any HF/6M
>amp for $32 delivered  (US). Another version for 2M/440 is also
>available for the same low price, and one for HF/VHF/UHF for $42
>delivered (US). Use with any version of the 706.  Jack Schuster, W1WEF,
>408 Thompson St, Glastonbury, CT 06033.
>
Does this interface use a relay or a switching transistor?
thanks.  

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>