Amps
[Top] [All Lists]

[AMPS] sb220 on 6m

To: <amps@contesting.com>
Subject: [AMPS] sb220 on 6m
From: 2@vc.net (measures)
Date: Thu, 11 May 2000 12:20:25 -0700
>
>What has been found to be the best way in handling grounding of grids for
>6m?  Direct connection or through convential parallel resistor/cap
>combination?
>............Thanks,  Merit W6NQ
>
?  There is little difference in the SB-220 grid resonance freq whether 
the grids are grounded direct or through paralleled C&R.  This is easy to 
check with a dipmeter.  

cheers

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>