Here is info for the 2006 (SIX METER VERSION). The transformer is a ECA1202A
and may be the same as the 2M version.
Caveat Emptor.
230VAC
Tap1- Green gnd
Tap2 BLACK
Tap3 and 4 Jumped
TAP5 White
for comparison
120VAC
Tap1 Green
Tap 2 Black
Tap 2+3 Jumped
TAP 4+5 Jumped
Tap 5 White
Good luck, I'll be glad to give you a copy of this one if you can't get the
exact one.
K0FF
-----Original Message-----
From: N7LQ <n7lq@powernet.net>
To: Amps <amps@contesting.com>
To: <amps@contesting.com>
Date: Wednesday, May 17, 2000 7:47 PM
Subject: [AMPS] Henry 2002 PS mod
>
>Hi Guy's,
>
>A friend of mine is in the middle of refitting a Henry 2002 that was in
commercial back to amateur 2M service. We
>have installed the proper plate line and would like to rewire the Plate
supply transformer to 240V, its currently set for
>120V operation. Does anyone out there have a copy of the schematic for
the plate supply, or the whole thing if
>possible? I'd be happy to pay copy and mailing costs....
>
>
>
>
>de N7LQ
>
>Shawn
>DM09dp and DN01fa
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/ampsfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|