In the module that Alan Harbach makes, he uses 20 ohm resistors for 220
volts and 10 ohm resistors for 120 volts.
Regards, Mike N4NT@chartertn.net
----- Original Message -----
From: "K0FF" <K0FF@ARRL.NET>
To: "Amps" <amps@contesting.com>
Sent: Friday, June 09, 2000 9:57 AM
Subject: [AMPS] Step-start. questiobn DE K0FF
|
| I have an SB221 on 110VAC (for portable/motel ops) and want to install a
| step-start. I already have a nice 110 VAC relay, but don't know the
correct
| size of series resistors to use. Any ideas?
|
| George, K0FF
|
|
| --
| FAQ on WWW: http://www.contesting.com/FAQ/amps
| Submissions: amps@contesting.com
| Administrative requests: amps-REQUEST@contesting.com
| Problems: owner-amps@contesting.com
|
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|