Amps
[Top] [All Lists]

[AMPS] s meter calibration

To: <amps@contesting.com>
Subject: [AMPS] s meter calibration
From: N6BUU@aol.com (N6BUU@aol.com)
Date: Tue, 13 Jun 2000 01:40:18 EDT
In a message dated 06/12/2000 10:36:10 PM Pacific Daylight Time, 
nospam4me@juno.com writes:

<< 
 Had a quick look at the site...   Their amplification abuse page 
 says 3 dB is a one s-unit change on your receiver meter.  I was 
 under the impression receiver s-meters were calibrated 50uV 
 for S-9  and 6 dB per s-unit.  The occasional "other mfgr" using 
 100uV for s-9
 
 cheers
 skipp  >>
RIGHT, AND COLLINS USES THE 100 UV FOR S-9             HANK

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>