Amps
[Top] [All Lists]

[AMPS] Apology... (Winding phasing)

To: <amps@contesting.com>
Subject: [AMPS] Apology... (Winding phasing)
From: wb8jkr@juno.com (Mark S Graalman)
Date: Sat, 19 Aug 2000 07:33:37 -0400

  My apologies to the list on my suggestion
that the windings be put in parallel. I realized a
few hours after sending that response, when I
did that type of thing I was always using SEPARATE
transformers and not windings on a common core.
  While I believe my suggestion of using a low voltage 
transformer to feed the primaries under test would
prevent any problem, my suggestion was a dangerous 
one.  I'll think my responses through more thoroughly in
the future.
  I could have gotten someone injured and I again
apologize.

Mark  WB8JKR
 
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] Apology... (Winding phasing), Mark S Graalman <=