>
>Fired up the Alpha for the first time in a month or so, and after 15 minutes
>I had a hard fault.
>
>I know have a Fault Code #1 when I turn the amp. Is there something I can
>replace or is this an internal fuse that causes this?
>
>Would rather not send this back to Alpha if I can fix locally.
>
Maybe the fault is not with the amplifier. The first thing I would test
is tube leakage at 5kV with neg. and with pos. on the anode. . All it
takes is a high-pot. tester.
good luck, Rich
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|