>
>I just wonder if I can get a SIMPLE answer to my question...
>
>What high voltages are used in different amps with 2 x 3-500Z ?
>What is the max. voltage used and min voltage
c. 2000v minimum for Mu=130 tubes. For Mu=200 tubes, one needs at
least 3000v to achieve a ZSAC of 75mA per anode). Up to 4000v is
permitted. However, some cowboys reportedly run 5000v on SSB and tune-up
with a pulser.
> and corresponding currents
>(key down at max. output).
>
The maximum current is 400mA.
cheers, Petter
>
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|