Hi folks,
I have some amp homebrewing parts for sale:
Eimac 4CX3000A, said to have full output when pulled from service.
I've checked the filament and checked for shorts, but have no way to
check emission. If you buy it and it doesn't work I'll refund your
money. $125
Jennings vacuum variable, 10-750pf, 5kv. $50
Plate transformer, Union Electric & Mfg. Co. (part no.TF4RX02YY),
primary taps (0/207/220/235), secondary 2800-0-2800v, oil filled.
Transformer says "530 mA DC" on the side, but I've tested it using a
variac w/secondary shorted by an ammeter at 750 mA for over an hour
with no problems. I've also wired it up with a fullwave bridge and 16
uF cap & bleeder, and the voltage drops from 4000vdc to about 3400vdc
when loaded to 1 amp. Weighs about 60 lbs. $75
240 vac variac, "Berco Rotary Regavolt" type 72A, 250vac input,
0-275vac output at 10A. $125
5v 30A filament transformer, 117vac primary, Stancor P-6492 $50
All items plus shipping from 27612. Email if you have questions. If
you think a price is out of line, let me know. I may reconsider or I
may decide it's not worth selling.
73,
Doug, KF4KL
doug@nc.rr.com
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|