>
>Was wondering what values are generally used to absorb the extra RF driving
>power from a 100 watt rig when driving a PA tube that only needs say, 55
>watts? Ex: A single 3-500Z being driven by a 100 watt exciter that does not
>have a "power out" control in SSB?
>
The easiest way is to add a cathode feedback resistance. 25-ohms will
raise the drive requirement to roughly 100w per 3-500Z.
later, Lane
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|