Amps
[Top] [All Lists]

[AMPS] Re: G2DAF Amps Circuit

To: <amps@contesting.com>
Subject: [AMPS] Re: G2DAF Amps Circuit
From: wc6w@juno.com (Radio WC6W)
Date: Thu, 26 Oct 2000 12:36:02 EDT

On Thu, 26 Oct 2000 00:18:55 -0700 measures <2@vc.net> writes:

>>  Today we should ask for a bit better fidelity.   -40dB is a good
>>benchmark.
>>
>Typical solid state radios are not this good.  

   True!   And it is a shame that they aren't!    


>A two tone test will not reveal the flaw in the DAF design because it 
>applies constant screen potential.  

   If the DAF is built per the original design, with a time constant in
the screen circuit that will allow the screen voltage to follow the
envelope of the SSB signal, then a two-tone test will give valid results.
 
   If the screen voltage TC has been modified, such that a constant
screen voltage is seen with a two-tone signal, then you no longer have a
DAF amplifier.

73,
  Marv  WC6W













*

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>