"Ian White, G3SEK" wrote:
>
> In a push-pull stereo system, you MUST periodically swap the tubes
> around - left to right, push to pull - in order to even out the wear.
> Incorrect adjustment of the stereo balance can cause premature wear
> along the edges or centers of the anodes.
With the advent of radially-finned anodes this advice is out of date. Tubes
should only be swapped from back to front!
73,
Vic, K2VCO
Fresno CA
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|