>
>Hi All,
>Me again!! Thanks for the replies on the twist-lock caps. I have decided
>to just re-make the PC board for using computer grade caps.
>
>I have the layout on a piece of acetate, but am not very good at
>transferring that to copper and etching.
>
It would be easier to mount the caps on G10 perfboard with Silicone
rubber adhesive.
>Does anyone out there know how to do this and would you be willing to do a
>one-of-a-kind board. I will gladly pay costs, etc. The layout I have on
>acetate is a positive image of the traces/pads to be left on the board after
>etching. It is a one-sided, simple power supply board for a Clipperton L,
>approximate size 5.25 x 7.1875 inches.
>
>Any help out there?
>
>Regard,
>Jeff W8CQ
>
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|