Amps
[Top] [All Lists]

[AMPS] about transformer rewinding

To: <amps@contesting.com>
Subject: [AMPS] about transformer rewinding
From: nospam4me@juno.com (nospam4me@juno.com)
Date: Tue, 26 Dec 2000 11:34:32 -0800
re: National and generic transformer rewinding. 
- 
Hi Mark, 
- 
In restorations, one may want the exact size of the 
original transformer, not a generic replacement. For a 
National Amplifier, the first place I'd look would be Ebay. 
There has been a significant "dumping" of NCL-2000 
NOS parts as of late.  Second, I'd find some of the 
specialist dealers who favor part for the NCL-2K.  Third, 
a worst case, I'd rewind it myself.   Carl, km1h and 
others on the Eastern Seaboard have been known 
to vend National NOS parts. 
- 
Many years back I did a repair on a Viking Valiant for 
a guy.  The transformer failed, a replacement could not 
be located after much searching.  
- 
We unwound the transformer, sized the wire and 
bought replacement stock at a motor rewinding shop 
in the next local city.  One has to pay careful attention 
to the direction, placement and turns number for each 
winding as they are removed and replaced. 
- 
It was a bit of a time consuming chore, but the 
rewind went on without a hitch and the transformer 
is in service to this day.  Actually runs cooler than 
the original did.   I suspect the original had some 
windings shorted, as indicated on Sencore LC-102 
winding ring test. 
- 
A good electrical shop will also have listings on 
"newer generations" of wire which have better 
types of bonded insulation. If one decides to 
"roll your own", some of the better insulators 
might be a better performer in the long term. 
- 
cheers
skipp    wv6f
nospam4me@juno.com  
- 
- 
--------- Forwarded message ----------
From: Mark <fordgt390@yahoo.com>
To: amps@contesting.com
To: <amps@contesting.com>
Date: Tue, 26 Dec 2000 07:00:06 -0800 (PST)
Subject: [AMPS] transformer rewinding?
Message-ID: <20001226150006.43551.qmail@web11608.mail.yahoo.com>
Hello Everyone,
Anyone still do this service reasonably at all for a
linear amplifier? Its for an NCL-2000 National
Amplifier. Its the main HV transformer of course. Let
me know, tnx and Merry Xmas!!
Mark
N0IUJ 

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] about transformer rewinding, nospam4me@juno.com <=