>
>Hi Bob,
>
>> I don't intend to start a war, however based on my observations over the
>> last 2 decades (at least) in going to rallies (what Americans call
>> hamfests) and my observations of some of the questions which crop up on
>> the ham radio newsgroups the average ham is too lazy to do anything.
>
>I don't intend to start a fight, but from my viewpoint the average
>ham is too quick to condemn everyone else.
>
>> Some of the comments which appear on Rich Measures web site about
>> commercial equipment are well justified, rigs with so called fast break in
>> using standard power relays to switch linears, no soft start for power
>> supplies, short circuiting HT lines as a safety measure, band switches
>> that arc because there is inherent in the design of an amplifier a cause
>> for VHF parasitic.
>
>I hate to tell you this, but if you think a VHF parasitic can arc a
>bandswitch you need a course in electronics 101.
>
When are You going to take EL-101, Mr. Rauch.?
>Perhaps you should look at the voltages and currents required to
>do that, instead of being critical of other for not knowing what is
>going on.
>
>Obviously you haven't researched the problem.
>
Tom plays the Sarcasm Card.
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|