Amps
[Top] [All Lists]

[AMPS] runaway amp.

To: <amps@contesting.com>
Subject: [AMPS] runaway amp.
From: RMcGraw@InfoAve.Net (Bob & Linda McGraw K4TAX)
Date: Fri, 23 Feb 2001 07:09:05 -0800
Yes, I agree that an upward power drift is most unusual.

As to finding the problem, I've found that cooling the component with a
can of cool spray is more accurate than a blast of hot air.

73
Bob K4TAX

Ian White G3SEK wrote:
> 
> Pete Smith wrote:
> >
> >At 11:22 AM 2/22/01 -0800, dan hearn wrote:
> >>
> >>Another thought: The problem seems to be heat related. Create a source
> >>of hot air which can be directed on various components while the amp is
> >>creating dots from your keyer into a dummy load.
> >
> >An easier alternative might be to provoke the amp into the beginning of the
> >runaway process and then use one of the available cooling spray can
> >products to cool components till you find the one that reverses the runaway.
> >
> 
> W0YR will be off the list for a few weeks, so maybe we have to leave it
> until he can make some more tests.
> 
> The real puzzle is that the RF output drifts UPwards, which is quite
> unusual.
> 
> 73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
>                           'In Practice' columnist for RadCom (RSGB)
>                            http://www.ifwtech.com/g3sek
> 
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/amps
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com



--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>