Amps
[Top] [All Lists]

[AMPS] SELL: Amp components for the homebrewer

To: <amps@contesting.com>
Subject: [AMPS] SELL: Amp components for the homebrewer
From: w2cqm@juno.com (Ronald Lumachi)
Date: Sun, 11 Mar 2001 17:05:37 -0500
SELL: Drake L4B (and other)  linear amplifier components for the
homebrewer:

Drake L4B 10-80m tuned input circuit mounted on the OEM subchassis. No
cut wires  and ready to drop in. Complete with two  cog gears for shaft
munting and the drive belt for remote positioning. Unit in perfect
condition with no RF burn marks. Coax input cable and grid blocking
capacitor in place.  $90+ shipping

Drake L4B plate and antenna tune air variable capacitors. Plate capacitor
has the shaft mounted vernier drive mechanism. Looks like new. $75 for
the pair + shipping

Drake L4B HV plate choke and the two silvered parasitic choke/resistor
assemblies complete with the dual blocking capacitors and mounting
hardware. No cut wires! Ready to drop in or keep as a spare. No RF burn
marks.  $65+ shipping

Pair of Eimac 3-500 bakelite SK410 air system socket pulls. $75pr 
($40ea)  + shipping

Pair of Johnson 8877 (3CX1500A7) porcelain air system sockets with grid
to ground tabs. $45+ shipping

3 minute solid state 110VAC delay timer (New)  Will handle 1amp to
control the relay contactor  to the plate transformer  HV primary. 
Essential for the 8877, 4CX1000/1500, 3CX800A7. $12+ shipping

Heavy wall teflon chimney for the Eimac 8877 $25 shipped

NIB tested only pair of Eimac 3CX800A7's with sockets and chimneys. 1995
date codes.   Were spares for a Command Technologies 2500 subsequently
sold. The pair will run 1800W++ output. $660 pr. shipped   
($330+shipping for one (1) tube, socket and chimney.) 

HV plate choke wound on a 1" porcelain rod (tapped both ends for ease of
mounting) with #20 enameled wire. 6" overall length. Will handle 3KW++
$25+shipping

Radio Switch 10KW 3P10T porcelain  bandswitch with detents and lockouts
for positions not utilized. Package complete with the AirDux 10-80 tank
coil assembly (mounted on a plastic subchassis). Will handle 3KW++. 
Switch is identical in design  to unit offered  in Surplus Sales Catalog
page 103 for $275 with only 6 positions.  $135+ shipping 

Ron W2CQM New York City

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] SELL: Amp components for the homebrewer, Ronald Lumachi <=