Offering to the amplifier/tuner builder the following items for sale:
1. Drake L4B plate (w/shaft mounted vernier drive) and antenna tune air
variables. Perfect condition. $70pr + shipping
2. Radio Switch porcelain ceramic 15KW 3P10T bandswitch w/detents and
lockout for positions not used. Includes AirDux 10-80m silver plated tank
circuit mounted on subchassis. Will handle 3KW+. $135+shipping
3. Drake L4B HV/Parasitic choke assembly w/silvered coil/resistor chokes
and dual blocking capacitors. Ready to drop in. Perfect condx with no cut
wires. $75+ shipping
4. NIB 220VAC Rotron Muffin fan 14W $13 ea+ shipping (2 available)
5. Dentron 160-10AT Super Tuner coil/bandswitch assembly and 2KW balun.
Removed intact with no cut wires. NO RF burn marks. $40+ shipping
6. 3P20T IKW+ bandswitch $12+ shipping
7. Internal mount silver plated SWR bridge pickup unit. Removed from new
military equipment. SWR and Forward pickups are BNC connectors. $20+
shipping
8. Pair of Eimac SK410 bakelite air system sockets for the 3-500. $75+
shipping
9. Eimac 8877 chimney (cut down) $10+ shipping
10. Heavy wall teflon 8877 chimney $25+ shipping
11. 3-500 porcelain socket $15+ shipping
12. 8877 air system w/grid to ground tabs $25+ shipping
13. 8877 air system socket no ground tabs $20+shipping
14. 8877 porcelain socket $10+ shipping
15. 8877 air system socket no ground tabs $15+ shipping
16. Drake L4B 10-80 tuned input assembly. Removed intact with input coax
and blocking capacitor in place. . No cut wires, no RF burn marks.
Complete with two shaft cog gears and cog belt in order to tandem switch
the tuned circuit and bandswitch. No detents. $75+shipping
17. HV plate chokes $12ea+ shipping
a. delrin 5" (3/4"diameter ) 1 amp threaded base
b. B&W 800 clone 1 amp porceelain mounting base
c. Teflon 4-1/2" (3/4" diameter) 1 amp threaded base
d. Repaired Ameritron AL series plate choke. Works perfectly.
e. National stacked bobbin HV choke 1 amp with mounting hardware and
porcelain standoff.
f. (Not shown) New 1" porcelain rod wound with 5" of #20 enameled wire .
Will handle 3KW++ $25+ shipping
18. NIB Solid state 3minute 110VAC delay timer. Will handle a 1 amp
contactor. Absolutely necessary for the 3cx800A7, 8877, and the
4CX1000/1500 finals. Resets to full term even with momentary shutoff.
$12+ shipping.
http://homestead.juno.com/w2cqm/files/DeckTunerParts.JPG
Ron W2CQM New York City
Epilogue: See QRZ.COM for the listing of the most recent articles
written for QST and 73 Magazine authored by W2CQM.
http://www.qrz.com/callsign.html?callsign=w2cqm
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|
