Amps
[Top] [All Lists]

[AMPS] Clipperton conversion

To: <amps@contesting.com>
Subject: [AMPS] Clipperton conversion
From: baycock@HIWAAY.NET (Bill Aycock)
Date: Thu, 22 Mar 2001 15:37:23 -0600
Tom- you keep saying "Clipperton-L" and W4EMF says "Clipperton QRO". There
seems to be some differences in the Amp panel and Mine- could you find out
the serial number of the original, and if it was really an "L" or not?

THanks- Bill- W4BSG

>
>Take a look at this neat conversion one of my customers did on this old
>Cliperton QRO amp. He used the Russian triodes GI7B. He said he would be
>glad to help anyone with a similar conversdion.
>http://www.tomstubes.com/amp-conversions/
>73
>Tom
>W4TH
>
>===================================
>Be sure to visit my web sites. 
>Tom's Tubes, Svetlana Amateur Radio Amp Tubes.
>
>http://www.tomstubes.com
>
>Ham Radio Homepage.
>http://www.geocities.com/bamagramps/
>
>
>--
>FAQ on WWW:               http://www.contesting.com/FAQ/amps
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>
>
-
Bill Aycock   ---   Persimmon Hill 
 Woodville, Alabama, US 35776
 (in the N.E. corner of the State)
      W4BSG   --   Grid EM64vr
        baycock@HiWAAY.net
             w4bsg@arrl.net

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>