Amps
[Top] [All Lists]

[AMPS] Vacuum Variable voltage rating

To: <amps@contesting.com>
Subject: [AMPS] Vacuum Variable voltage rating
From: shr@ricc.net (W0UN--Signal Hill Ranch)
Date: Thu, 12 Apr 2001 10:52:36 -0600

>
>A lot of the glass vacuum variables being sold at
>flea markets/E-Bay are 50 years old, or so.
>Caveat-emptor!


You can get a good idea of the vacuum by just grabbing
the drive mechanism and seeing you can pull it straight
out.  The same as reducing the capacitance but without
turning the screw.  A bad vacuum will be easy to pull--
only a couple of pounds of force max.  A good cap will
require 30 or 40 pounds of force depending on the surface
area of the bellows.  Makes for a quick test to see if you
should even consider a flea market special.

John  W0UN


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>