To: <amps@contesting.com>
>Date: Tue, 17 Apr 2001 14:19:52 -0500
>To: measures <2@vc.net>
>From: Bill Aycock <baycock@HIWAAY.NET>
>Subject: Re: [AMPS] Zener screen supplies
>In-Reply-To: <200104171927.f3HJRaW31302@contesting.com>
>
>Rich- it was clear to the rest of us- why didn't you read before sneering?
>
>Bill
>
>At 12:27 PM 4/17/01 -0700, you wrote:
>>
>>>
>>>Message text written by measures
>>>
>>>>Why haven't you measured one?<
>>>
>>>I did say that I would refrain from feeding the trolls. However -- and for
>>>the record -- those who read material posted to this reflector may recall a
>>>note from me dated yesterday (Sunday 16 April). In this, I said that the
>>>external anode-screen insulator of a small 4CX had a path length of just
>>>under 7mm. This observation was the result of direct measurement of a
>>>4CX250B.
>>
>>>In reply, you said "...the insulator looks wider to me",
>>
>>? It was not clear to me that you had used a ruler.
>>
>>
>>> although I noted with interest your subsequent comment to Peter that "I
have
>>no
>>>4CX250Bs left in my valve drawer."
>>>
>>? How could this possibly be "interesting"?
>>
>>>I suppose you don't _have_ to read what people post, but it might be useful
>>>and constructive to do so before making what purports to be a reply.
>>>
>>? Sounds a bit like "Anne" on NBC's 'Weakest Link'.
>>
>>
>>cheers, John.
>>
>>- Rich..., 805.386.3734, www.vcnet.com/measures.
>>end
>>
>>
>>--
>>FAQ on WWW: http://www.contesting.com/FAQ/amps
>>Submissions: amps@contesting.com
>>Administrative requests: amps-REQUEST@contesting.com
>>Problems: owner-amps@contesting.com
>>
>>
-
Bill Aycock --- Persimmon Hill
Woodville, Alabama, US 35776
(in the N.E. corner of the State)
W4BSG -- Grid EM64vr
baycock@HiWAAY.net
w4bsg@arrl.net
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|