Has any one tried using a blower from the top of the deck through to the
bottom. I have a small 19" rack RF deck with a 2-1/2" bottom, and my blower
has a 3" opening. I am trying to mount the blower on the back of the amp, I
dont want to mount it on the bottom because I would like to be able to set
the deck on a table. So I was thinking of trying to pressurize the top of
the deck and have the air flow down to the bottom and out. Would this work
if I doubled up on the blowers and used two instead of one?
KRS
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|